Checking the Cable or DVR Set Top Box
Turn off then turn on your device. It is possible that your DVR or cable box may have malfunctioned and requires a power cycle. On the device itself hold the power button for ten seconds to shut it off. It it continues to not turn off, you can unplug the power cord from the power outlet for 15 seconds then plug back in and wait 30 seconds. Press the power button to turn the device back on.
Review the error code on your device. Your device may have a specific set of numbers or errors on its display indicating a problem. Review your user’s guide or cable provider’s website for further details on resolving the issue. You may have a different cable box such as a Motorola device or Scientific Atlanta cable box which depends on the region you are in which will require you to check for specific error codes based on the manufacturer.
Check the cables on your device. Make sure the coaxial cable (cable antenna wire) is not loose between both the device and the television. Ensure the cable is fed into the appropriate inputs and outputs between the cable box and television displays. Try using a stronger RG (Radio Guide) coaxial cable type such as RG-6 which provides a stronger signal strength to ensure the highest quality picture possible.
Checking the Television Display
Check the signal integrity directly. You can check the cable signal is working by taking the plug from your cable box to your television directly. Be sure to remove any other connections that may cause interruptions or delays such as a VCR, DVD, game console, surge protector or other devices.
Rule out other devices that are passed through. One of your devices may be producing a picture that is not compatible with your display. Check to ensure your television is able to receive a specific signal from your pass through device.
Display the correct video input. Check where the video input is plugged in on your television and confirm with your television’s “Input” settings. Check if the television is on channel 03 or channel 04 or if the input should be set to CATV, AV1, AV2, Video 1, HDMI or other similar video inputs.
Calling Your Cable Provider
Review your activation limit. If you are trying to use your cable box after moving to a new location. This is designed within the set-top box itself and may need to reset the activation limit by calling your provider.
Pay your bills on time. Make sure there are no overdue payments as this may deactivate your service until the payment is processed.
Verify for any reported outages. Sometimes your cable provider will have downtime due to scheduled maintenance or severe weather conditions that interfere with the delivery of their service. They may give an estimated time when the services will resume either on their website or through their customer service line.
Comments
0 comment