How to Make Play Tubes for Your Hamster

Choosing Your Tubes

Save empty toilet paper rolls. Empty toilet paper rolls are great choices because they are large enough for most hamsters and are sturdy enough for them to crawl through. Toilet paper rolls make great connectors for your maze sections.

Collect empty paper towel rolls. Empty paper towel rolls are good for making longer sections of the maze. Using the longer tubes can save you time when you’re assembling the tubes because you don’t have to tape as many tubes together to make your hamster’s toys. For longer tubes, you can also use a mailing tube if you can find one. Another option is a wrapping paper roll.

Use tissue boxes to allow for burrowing. You can add onto your tubes using tissue boxes, which make a great spot to add burrowing materials or other toys to your hamster’s tube maze. Use the tissue boxes as the corner(s) or your maze by attaching tubes to two of the adjacent sides of the box. Put bedding or shredded paper inside the tissue box so that your hamster can play in the box. Cover the open part of the tissue box with paper so that your hamster doesn’t crawl out.

Try an oatmeal container. Oatmeal containers mix up the size of the tunnels and make it interesting for your hamster. You can either remove the bottom and lay it on its side, or you can stand up the oatmeal container and use it as a corner piece by cutting holes in the sides of the container and attaching tubes.

Creating Your Maze

Decide how much space you have for your maze. Choose a safe play area for your hamster maze, such a room where you already take out your hamster to play. If you are putting the tubes in your hamster’s cage, consider the smaller size of the cage, which may only fit one or two tubes. Consider sealing off the maze as best as you can so that your hamster has more room to run and play in it. You could even assemble the maze in a place like your bathtub, which would be harder to escape if you hamster makes a run for it. Just make sure to block off the drain and keep the water turned off.

Design your maze. Set up the corners first, then line up the tubes how you’d like them to fit together. Include twists and turns so that your hamster will have fun exploring. Remember to allow space for your hamster to turn around. You can create levels by elevating some of the tubes. One option is to create an offshoot from one of the tissue boxes that is higher off the ground. Balance the tube sections on blocks, cereal boxes, or a plank of wood. You can also create zig-zags to make things interesting for your pet. Try creating a maze with a specific theme in mind. You can arrange your tubes to look like something, such as a spiral, Christmas tree, or witch’s hat.

Decorate your tubes if you want a fun look. Store-bought hamster tubes are often fun colors. If you want a similar look, you can paint your tubes using paint that is labeled as non-toxic. It’s best to do this before you tape the tubes together. Try painting stripes or polka dots on your tubes. Alternatively, you could glue paper over the tubes using non-toxic glue. Choose a design or paint colors that go along with your theme. For example, use red and green for a Christmas-themed maze, orange and black for a Halloween-themed maze, or bright colors for a spiral.

Putting the Tubes Together

Trace where you will cut holes into the boxes and tubes. To create offshoots and exits from the boxes or longer tubes, you will need to fit the ends of other tubes into the sides of the cardboard. For example, you may want to have two long tubes connected parallel to each other by a short toilet paper tube, which would require you to cut a hole in the side of both of the longer tubes. Place the end of the tube you are tracing against the place you want the hole. Trace the outline of the roll. Continue tracing until you’ve outlined all of your holes.

Cut out the holes. Use craft scissors or a craft knife to cut out the traced holes. Be careful not to make the holes too large since that could allow space for your hamster to squeeze out of the maze, or it could cause the maze to collapse while your hamster is playing inside.

Fit and tape the tubes together. Insert any tubes that will go into holes in other tubes or the boxes, and then line up the remaining tubes end to end. Apply tape to the tubes, layering several pieces to make the maze sturdy. Your hamster will need to be able to scurry inside the tubes without the maze coming apart. If a tube is going inside of a hole, make sure that there is not a lot of space around the tube. If there is, you can fill the space with pieces of paper towel or cover the space with extra tape. You can also wrap strips of paper over the places where the rolls meet, taping the paper in place. For example, two paper towel rolls could be joined by wrapping a sheet of paper around the rolls and taping the edges of the paper down.

Putting Your Hamster in the Maze

Get your hamster out of its cage and place in in the play area. Stay with your hamster while it enjoys its new play tubes. Your hamster could easily get out of the tubes if left unattended.

Put a treat at the end of the tunnel. Increase your hamster’s enjoyment of the tubes by enticing it with a small treat, such as a yogurt treat or a nut. Not only will your pet enjoy the treat, but it will also help the hamster figure out how to use the maze faster because it will smell the treat and go search for it.

Expect your hamster to shred the tunnel. Hamsters love to chew and shred, and cardboard is especially good for that. Your hamster will eagerly shred its new tubes, so don’t be mad when you see it chewing holes and tearing your construction apart. This is part of the fun for your hamster.