How to Make a Kite for Kids

Making the Frame

Gather all the materials needed to make the frame. It’s helpful to have your materials close by and ready for you to quickly and easily make the frame. You can get these materials at your local craft store. 4 wooden dowels that are 3/16 inch in diameter Hand saw Craft knife String, twine, or fishing line

Cut 3/16 inch diameter wooden dowels to the length of your kite supports. The vertical support of the kite will measure 24 inches. The horizontal support of the kite will measure 20 inches. Make sure to ask an adult for help when cutting the dowels. Measure the lengths of the dowels. Mark the dowels with a pencil at the desired length. Cut the dowels with a hand saw to prevent splintering.

Cut notches into the dowels. Use a craft knife to cut small notches into the ends of the dowels. Cut a notch on each end of the dowel perpendicular to the length of the dowel. The notch should go across the dowel, not be in line with it. Craft knives are very sharp, so make sure to get an adult to help you with cutting or cut the notches for you.

Mark the dowels. Use a ruler and your pen, pencil or marker to make measurements on the two dowels. On the 24 inch dowel, make a mark 6 inches from one end. One the 20 inch dowel, make a mark 10 inches from one end.

Align the two dowels. Line up the two marks you made on the dowels by placing the shorter dowel on top of the longer dowel perpendicular to it. The two dowels should make a cross.

Tie the dowels together. Use the string, twine, or fishing line to tie your dowels together where they meet in the center. Tie the string in a knot around the two dowels and then wrap the string around the dowels making an x shape as you wrap. Hold the dowels perpendicular in a cross shape as you wrap the string around them. Make sure you are wrap the string tightly. Tie a knot in the string after you have securely fastened the two dowels together. Do not cut the string off after wrapping the dowels together, you will string the frame together next.

Wrap the string around the outside of the frame of the kite. Bring the string up to top of the dowel cross and wrap it around the notch at the top. Pull the string around each of the four ends of the kite frame in a clockwise direction. Wrap the string around each dowel as you go around the frame. Bring the string back to the center to tie it off around the x in the center. The string should be in the shape of a kite. Pull the string tight as you pull it around the dowels so it is taut.

Creating the Sail

Pick material to make the sail from. You can make the sail of your kite from several different materials. Decide what look you want for your kite. Some materials can be decorated to make your kite unique. You can use any of the following: Heavy duty garbage bag Lightweight paper Lightweight fabric Newspaper Plastic bag

Get together all the materials needed to create the sail. You should have all of your tools and materials gathered in one place before you start a project. Material for the sail Scissors Strong tape

Cut the sail of the kite. Lay the kite frame down on the sail material, and trace a slightly larger kite shape. The outline of the kite should be 1 to 2 inches bigger than kite frame. Use the scissors to cut out the kite shape on your sail material.

Attach the sail to the kite frame. Fold the edges of the sail over the string on the frame and secure it with strong tape. Reinforce the top and bottom of your kite. Use tape to reinforce the top and bottom tips of your kite by placing 1 to 2 extra pieces of tape across them.

Attaching Your Kite’s String and Tail

Gather the tools and materials needed to make the kite’s string and tail. Having all of your materials in one place before you begin will save you time as you are finishing up this project. Pen String Ribbon Tape

Make the kite’s brindle. A kite’s brindle is a string that extends the length of the frame and has the flying string attached to it. Use a pen to poke a small hole in the top and bottom tips that you have reinforced with tape. Cut a 2 foot piece of string Tie the string in a knot around the top hole. Tie the other end to the bottom hole.

Attach the flying string to the brindle above the point where the dowels cross. Hold the kite up by the brindle. Find the point along the brindle where the kite hangs parallel to the ground; this is the spot where you want to attach the flying string. Tie the end of the string in a knot around the brindle. You will hold the rest of the string when you are flying the kite.

Use the ribbon to create the kite’s tail. Attach the ribbon by tying it to the hole at the bottom tip, or by taping it to the bottom. Your tail should be about 6-20 feet long depending on the weight of your kite. Cut small pieces of ribbon to tie bows around the tail. Experiment with different lengths of tails for maximum stability.

Fly your kite. Take your kite out on a windy day to watch it fly! Bring tape with you to help fix any damages that might occur while flying or landing.